Tuesday 23 January 2018

From Curt: Screaming Antelope and Terrain for 'Kingdom Death' (32 Points)


Hi All!

Our gaming group has been playing a lot of 'Kingdom Death' lately, and I have to say it's a very addictive game - very nasty and adult, but addictive. The core campaign is called 'People of the Lantern' and lasts, if you're lucky, around 30 sessions. We're about four sessions in and have managed to survive several White Lions and our growing settlement is just about to track down the next nasty: 'The Screaming Antelope'. 

From a distance, the creature looks like a giant antelope, but when you look closer you discover that it has a nightmarish gaping maw that runs down the length of its underbelly, with little creepy hands emerging from each side of the mouth that help to stuff in any nearby victim. 



Yes, the hills are alive with the sound of...screaming... Yeesh. 

As nasty as this creature may sound, it's small beer compared to what's coming down the pike. Oh well, it's not called 'Kingdom Death' for nothing.

I've painted the Screaming Antelope pretty much the same as I did  the White Lion last month. Sort of a sepia greyscale(ish) effect, with a bit of source lighting (sorry Greg) cast underneath from a dropped lantern (a little 3D print I came across). 







Sarah absolutely hates it, so I must be onto something. :)

In addition to this gnashing beastie, I've also managed to get some terrain done for the game. 



The core box comes with an assortment of punch-out cardboard pieces to represent obstructions and various bits of cover. They're perfectly fine and serviceable, but I thought it might be nice to have something a little more in-theme to go with the miniatures.

I did some poking around on Thingiverse (gosh, I LOVE that website) and discovered that some very talented folks have made excellent 3D designs of most of the game pieces. I printed off a set of the Fallen Pillars (artist: Gazgoblin) and the Giant Stone Face (artist: heribertovalle) to see how they looked. Well, as you can see they printed out very nicely, with lots of deep relieve which makes drybrushing them a doodle. 


Felix was hoping it was a dog treat.


I think I'm going to place some lanterns along the edges of these to cast (airbrush) some spooky uplighting, but that will have to come at a later time.



We face-off with the Screaming Antelope tonight, so wish us well!

Next up for this game will be the oh so touchy-feely: 'The Butcher'

_________

Hoi Curt,

Gosh, who had thought that the great Snowlord himself would be dropping in for a post all of himself? And me being allowed to judge him at that?!  I have seen the Kingdom Death figures many times in several places and while the sculpting is beautiful and the painting exceptional, they are too creepy for me. That said this stuff of yours is brilliant, I cannot say anything else. The source lighting is absolutely gorgeously executed, my wife would dislike it just as much as the Lady Sarah would so that must count for something indeed. The storyline behind it really does remind me of The Witcher stories, so yeah cool! Being able to print your own miniatures and scenery must be great, I must look into that 3D printer business more earnestly. Anyway as far as scoring goes, nobody will be surprised if I follow your scoring of 20 points for the scenery and 12 for the miniature (for which I have seen precedence) and thus a total of 32 points. 

Well folks, that was Tuesday for this week have a good night!  

_________

35 comments:

  1. Wow, these figures just look great. I ordered the Mansions of Madness game as discussed holding off on Kingdom death for now.

    I was hoping to try to do some greyscale and did some research last night but it really is just too daunting for me I think. The sepia greyscale is even more impressive, especially with the lantern effect.

    Great terrain pieces, 3D printing just amazing.

    ReplyDelete
    Replies
    1. Thanks very much John.

      Mansions of Madness is great fun and I think you'll quite enjoy it. Kingdom Death's insane price point makes it near to a 'lifestyle choice' than a hobby purchase. ;)

      There are a few greyscale paint kits out there now which makes the whole process much easier. Scale 75 offers a 'Black and White' set here:

      http://www.greenstuffworld.com/en/paint-sets/522-paint-set-black-and-white-scale75.html?search_query=grey+scale&results=28

      I wish I had this when I was starting my WWI Greyscale project as developing the various shades from scratch was absolutely torturous.

      Delete
    2. Well that was easy, I hate mixing paints, we will see how it goes. Many thanks.

      Delete
  2. Stunning paint job on both. The light cast by the lantern is just brilliant.

    ReplyDelete
  3. Gods, but that's creepy. I ended up with one of their figs in a grab bag from a mail order place that was closing down, and I have to say that while the sculpt was exquisitely detailed, painting and displaying the fig might have created some domestic disharmony...

    That said, I have to say that your mastery of OSL effects is incredible, even if the subject makes me want to lose my breakfast!
    : )

    ReplyDelete
    Replies
    1. Ooh, do tell, what fig did you get in your grab bag?

      Delete
    2. A young lady carrying an implausibly huge bone blade over her shoulder and wearing not a lot. I think there were a couple of others like her in the range; she was one of a trio IIRC. I ended up giving the fig to a mate.

      Delete
  4. A truly gruesome beast Curt. No, not you. Nor Felix. I mean that antelope of course! ;)

    Nice terrain bits as well :)

    ReplyDelete
  5. Love the way you have painted the Kingdom Death stuff, above and beyond. Off to look it up

    ReplyDelete
    Replies
    1. Very kind of you Martin, thanks so much.

      Delete
  6. That creature is hideous! Great painting though. Very nice terrain pieces. cheers

    ReplyDelete
  7. Wonderfully creepy stuff Curt! You're getting a load of use from your 3D printer it seems.

    Your monstrous creature reminds me of the Gardens or Hecate blog, of which I am a huge fan. I assume you know it?

    ReplyDelete
    Replies
    1. Thanks Millsy. Yes, I love using the printer - it always seems like magic to me.

      No, I've not heard of this blog. I'll have to look it up.

      Delete
  8. Nope nope nope to the antenope. I’m planning to dabble in 3d printing later this year, I’ve been encouraged by your success.

    ReplyDelete
    Replies
    1. If you decide to get one please feel free to drop me a line for pointers.

      Delete
  9. Remarkable painting of a very beautiful miniature!

    ReplyDelete
  10. Grotesque minature, nicely done! 3d printing looks ace, very angkor Wat.
    Best Iain

    ReplyDelete
  11. The goat reminds me of an old Hammer House Horror film I saw when I was young, this horrible Devil Goat thing, it frightened the life out of me!!
    The 3D stuff is simply awesome!!! Unpainted it does look like Strawberry jelly (jello on your side of the pond). I think that's what Felix thought?

    ReplyDelete
    Replies
    1. Yes, I'm sure he thought it was something nummy and meant for pups. I had to give him a real treat to keep him happy. :)

      Delete
  12. Amazing work Curt! Creepy as hell, but I guess that's the point ;)

    What 3D printer are you using? The print quality looks pretty amazing

    ReplyDelete
    Replies
    1. Thanks Samuli. These prints are from a Moonray DLP resin printer. It can actually print at a finer quality but it usually more than doubles the job-time and I find the results rarely warrant it as the lower quality is usually very smooth.

      Delete
    2. Thanks! That's a completely new brand for me, but I'll really have to check it out! Having switched jobs I lost my easy access to 3D printers so I'm thinking about buying my own finally.

      Delete
  13. Excellent work Curt, I like the added touch of the lantern bit with the antelope. Good luck fighting him this week, I never found him that hard (about the same as the lion), just different... it will take a few fights to learn his tactics.

    The terrain is very nice as well, I love those pillars! the face, I am not sold on though. The paint job is great, not questioning that, but it's supposed to block movement and LOS, add range when standing on it, and take a whole turn to climb onto it. I just always thought of it as almost as tall as a survivor in my head.

    ReplyDelete
    Replies
    1. Thanks Byron. Yup, he gave us a bit of a kicking but we prevailed in the end. We even managed to dispatch the Level 1 Butcher without too much drama (we were very lucky in our hit/wound rolls).

      Yes, the face is still representational, not a full What-You-See-Is-What-You-Get. It's about 2/3s the height of the human models and I'm okay with that as we can use our imagination to fill in the vertical dimension. Besides, we use our imagination for almost everything in these types of games. :)

      Delete
  14. Sure glad the "Screaming Antelope" population of the Canadian prairies will be under control soon...

    Fine work dude!

    ReplyDelete
    Replies
    1. Thanks Greg, now, if we could just do something about all these pesky Millennials... ;)

      Delete
  15. That's absolutely creepy. Maybe a tad too much so for an Angsthase like me... the OSL effect definitely makes it look like directly out of some nightmare. The printed stuff is very nice as well. I'm impressed by the lack of any visible printing lines. Are these things so good already?

    ReplyDelete
  16. Ah this game is so weird, but very nice job to make it even weirder in sepia tones!

    Nice board-pimping with the 3D printed terrain too.

    ReplyDelete
  17. I really like the terrain l, Curt! That adds soooo much to a game beyond card tiles. The screaming antelope is even more creepy than the one Byron did last year( which sez a lot)
    I'd only track one with a large caliber squad automatic....don't release the trigger till it stops twitching! ;)

    ReplyDelete