From MartijnN: Just past the post! (402 points)

Wow, I don't think I have ever been cutting it so close in the Challenge. I have been painting steadily throughout, if not as often or as much as I would have liked, but never seemed to get anything really done. So, I have only managed a few posts this time on my appointed Saturday (sorry, Sander!). However, I really wanted to get as close to my target as I could get, so here are my final contributions:

First, there are two more vehicles for my Bolt Action French army. As I said before, I really like the quirky French camouflage schemes, and these two are no exception. Here is a Panhard armoured car, a Warlord resin and metal model that arrived on my doorstep recently. It's a nice model, and I think the Panhard looks surprisingly modern.

Then, there is a Hotchkiss light tank. It is a 3d printed model, designed by Counlane Models. It is a very detailed model, and it went together nicely; it would have been even better had I used a less flexible resin. However, the end result is quite acceptable.

Then, I printed and painted more of the excellent Colonel Muller figures. Here is another squad of reservists, complete with VLB grenade launcher.

I also painted two LMG teams. I put them on a single base, just so that the loader is always with the gunner, and I like them that way.

Finally, a few regular infantry and an officer. In all, there are 20 28mm figures.

Then, I have painted my first "mass" units of 28mm Napoleonics since the 1990's. They are two 24 man battalions of the 28th French Line Infantry, the first battalion with the eagle and the second with the fanion, No, that is not a white flag, thank you very much. I also painted two mounted officers to go with them. The first battalion are Warlord plastics, the command figures and the mounted officer in metal; the second battalion are the gorgeous Piano Wargames figures, now also available in plastic, but these were 3d printed by myself. I have since switched over to a more flexible resin, which is just as well for the first bayonet has already broken off and disappeared into the unknown, However, the unit still looks good I think.

So there you have it. I'll claim 2 points for the Panhard commander, so as not to go down the 0.5 points route. The tally should be, then:

2x 28mm vehicles @20 = 40

2x 28mm mounted @10 = 20

68.4 x 28mm foot @ 5 = 342

For a total of 402.

Must be the most points I have ever gathered in a single post! And hit my target after all, phew.

See you in the wrap-up!

Martijn

______________________________

Martijn, lovely work on this veritable points bomb you have for us! I've very much enjoyed watching the progress on your WWII early French project. The armoured car and Hotchiss look suitably en français in their distinctive ameba camouflage. I also like your soon-to-be-demobbed reservists (and agree about having the squad weapon loader based with the gunner). Finally, your first mass units since the 90s! Well, that is something to celebrate, especially when they look as good as these. Again, I have to agree with you in that those Piano models are very nice (and now available in plastic, no less). The only thing that would make them better would be them in the early Empire uniform, but that's just me. :)

I'm delighted that you hit your target with this last post, Martijn and I hope we enjoy your company for the next Challenge.

- Curt

From MartijnN: More Early War French (125 points)

Last week, I painted my first 28mm vehicles for Bolt Action. Today, there are my first 28mm World War II infantry. These are mostly 3D printed figures. First, I have a squad of ten regular infantrymen from BattleCat Miniatures. They are very nice figures, nicely varied and sturdy. They are just a little on the large side, but on the table you can't really notice. Still, if I print more I will likely scale them down to 95%.

BattleCat Regular Infantry

 Next, there is a squad of French Reserve infantry. The French army was among the best and the largest in the world in 1940, but many of the troops were reservists. These figures are 3d prints again, designed by Colonel Muller. These are very compatible with Warlord plastics, and they really are very nice indeed. They are armed with older firearms, and carry what was essentially the 1893 model backpack. Apart from the colour of the uniform, they actually look hardly different from the poilus of the Great War.

Colonel Muller French Reserve Infantry

I like how they even have a bugler!

Finally, there is a 80mm mortar. These are Warlord metals. The figures are okay, but quite less detailed than the 3D printed ones. Still, they look quite good now they are finished I think.

Warlord Metals

I painted all these using contrast paints again, and I was quite surprised by the result. I am  not particularly happy with the helmets, which are a touch too green for my taste, so I will be looking for another colour to use on future miniatures. However, I used Aggraros Dunes for the units and I think that suits them quite well. I might have given them a wash with Military Shade to give them more of a green tint, but I think they will do fine for now. Especially on the 3D prints the effect of the contrast comes out nicely. As a result, these were relatively easy and fast to paint, which is a bonus when you have to get quite some done.

My first game is on the agenda in a couple of weeks' time, and I think I may have enough for a small game already. However, since I still have some cool models lying around I might do a couple more to increase my options.

In all, there are 20 infantrymen and a mortar with three crew. Again no squirrel though, as this is the same army as last week. So that is:

23 x 28mm foot @5 = 115

1 crew served weapon @ 10 = 10

For a total of 125 points. 

 Martijn, you really have taken a shine to your new project! It is progressing in a grand old way with this excellent infantry and mortar support! The 3d print figures do really look good and yes that bugler is an awesome addition.  

Cheers Sander