Showing posts with label 1/50. Show all posts
Showing posts with label 1/50. Show all posts

Monday, 15 January 2024

From FrederickC - Early War French Division Légère Mécanique [New Acquisitions] (580 points)

My third submission for the challenge is a selection of early World War 2 French tanks, transports, and troops of a Division Légère Mécanique (DLM), or Light Mechanized Division. They are something that I have been thinking about for a while, and they have finally come together in time for this year's painting challenge.
 
First up are the armoured vehicles consisting of a mix of Char B1 bis, Somua S35, and Renault R35 tanks. The Char B1 tanks are 3D prints by the same friend who did my Polski FIAT trucks, while the latter two types are Solido diecast tanks that were repainted to give them a unified camouflage scheme. Historically the DLM tank battalions were equipped with Hotchkiss H35/H39 and Somua tanks, but I already had the R35s, so I went with that. The heavier Char B1 was not found in the DLM, but I always liked the look of it and added two to my French force. All the tanks were given a coat of USA Olive Drab surface primer using an airbrush. (In the case of the Char B1s, they got a coat of black primer first.) The brown and yellow were applied by brush, and then the whole tank got a wash of Citadel Agrax Earthshade. After the decals were applied, all the vehicles got a wash of Vallejo Model Wash European Dust around the tracks and road wheels.
 
 
 
The Char B1 served in the armoured divisions of the French army, the Division Cuirassée (DCr). It was armed with a 75mm howitzer in the hull, and a 47mm gun in the turret. Although well armed and armoured, it suffered from the design of a one-man turret, where the commander had to act as both loader and gunner as well. My two models are 3D prints done using an STL file I found online. There must be a flaw in the file because the right track system printed with the tracks misaligned so that they touched the fender at the back of the tank, and didn't sit evenly on the table. To solve the problem, I used a fine blade saw to cut off the right track, reposition it correctly, and glue it back into place using super glue and baking soda (or sodium hydrogen carbonate for the chemists in the crowd 😉). My friend used different resins in the two prints, giving one model more flex than the other. That was the first one where I sawed off the tracks, which worked fairly well. When I went to do the second model, pressure from the blade caused the back part of the fender to break off, along with part of the exhaust system. I still don't know where the missing piece went, and it has probably been sucked up by the vacuum cleaner by now. I was able to rebuild the missing area from bits and bobs from my box of scratch-building supplies. I also added radio aerials to both tanks, but I probably only needed to do that on one model. Radio sets were not distributed below command tanks in the French army.
 
 



 
The Somua S35 was considered a 'cavalry tank' in the French army, and was one of the main tanks in a DLM. It had good speed, adequate range, and a gun powerful enough to destroyed any enemy tank it was likely to encounter. Like the Char B1, it had to deal with the problems of a one-man turret, as well as poor mechanical reliability. Its suspension system was too weak, too complicated, and the cast armour made it difficult to repair in the field.  The models are Solido 1/50 diecast that I purchased years ago, but as I acquired them individually off of eBay, they had two different paint schemes. One was sold green, while the other had a random green and dark brown camouflage pattern. As well, one of the tanks was missing the gun mantle off the main gun and the turret machine gun, so I scratch-built replacements. Now they look like they belong to the same unit.





The last pair of tanks are Renault R35s that saw service with the French Bataillon de Chars de Combat (BCC), as well as some that were sold to Poland and other countries. It was armed with a low velocity Puteaux cannon. Again, it suffered from a one-man turret, and rather slow speed. Some of the men from the Polish 10th Motorized Brigade, having escaped to France, saw service in these tanks in May 1940. These are also Solido 1/50 diecast models picked up from eBay when they were still fairly inexpensive. One was originally solid green, while the other had a green and tan camouflage pattern on it. I prefer the look of the three colour green, brown, and tan, although all the various colour combinations were used in 1940.





Now we come to the transport part of this submission starting with six Laffly S20 TL trucks designed to transport a squad of Dragons Portés, or motorized dragoons of the DLM. These are again 3D prints done by my friend from an STL file I found online. The file generated a very detailed model, but one that may not stand up to the rigours of the wargame table. My friend said he broke off the two side mirrors and the windscreen while trying to get the first print he made free from the supports. Afterwards he adjusted the files to remove the support problem, and the rest printed successfully without any issues. I also managed to snap off a side mirror, and a rear tire of two separate models while prepping them for painting due to rather fragile axles on the models. Once again I resorted to the super glue - baking soda combination to get a strong repair. I also scratch-built replacement mirrors using some florist wire and a small plastic disc made using my leather hole punch. All the models were primed black, followed by a coat of USA Olive Drab. The seats were painted using Vallejo Tan Earth, and the whole truck got a wash of Citadel Agrax Earthshade, followed by Vallejo Model Wash European Dust around the wheels and fenders.
 


Repaired mirrors on the right




While I was working on the other vehicles. I remembered that I had a Tamiya 1/48 model kit of a Citroën Traction 11 CV staff car sitting in a box in the basement. I originally wasn't sure how I wanted to paint it up, but in the end I decided to add it to my French force. It was an easy kit to assemble, and I painted most of the exterior using an airbrush while the parts were still on the sprue. From unopened kit to complete vehicle in less than a day.
 




At last we come to the troops, in this case Dragons Portés. All of these figures are very recent acquisitions from Crusader Miniatures. We will start with a platoon of three squads and a platoon headquarters. Each squad consists of ten men, including a man carrying a Fusil-mitrailleur Modèle 1924 M29 light machine gun, and his No. 2 holding spare magazines. All the squads have an extra figure armed with a Viven-Bessières rifle grenade cup discharger, as this is one of the options in the Bolt Action rules. One of the squad leaders is carrying a MAS-38 submachine gun.
 







Finally we have have some support weapons consisting of two Hotchkiss machine guns, a Hotchkiss 25mm anti-tank gun, an 81mm medium mortar, and a 60mm light mortar. At some point I want to add some ammunition boxes and spent casings to the bases, but I didn't have anything appropriate in the bits box. That will have to wait until some point in the future, but for now I am calling it done.
 
 



For painting up the Dragons Portés, I followed the guide below from 'Flame of War' fairly closely since I had all the necessary colours in my inventory. Two exceptions are that I used USA Olive Drab instead of Gunship Green on the vehicles, and I used Army Painter Leather Brown instead of German Camouflage Orange Ochre on the soldiers' ammo pouches and Y-straps. After the figures were painted, they got a coat of Army Painter Strong Tone Quickshade. As mentioned in my previous submission, this leaves the figures with a glossy sheen, but I will spray them with a matt coat when it is safe to work outside. (It is currently -24°C, with a windchill of -33°C in lovely Winterpeg, Manitscoldout. 😱)
 




Since most of the vehicles and all the figures are new acquisitions, I will claim that Library category for this post.
 
 

 
The points being claimed are as follows
 
54 x 28mm foot figures @ 5 points each = 270 points
 
13 x 28mm vehicles @ 20 points each = 260 points
 
3 x 28mm artillery pieces @ 10 points each = 30 points
 
Library section 'New Acquistions' @ 20 points = 20 points 


Sylvain: If "Early WW2" were a family, I would be the "little" brother while you would be "BIG" brother. This is an outstanding submission in quantity, quality and description.

Quantity means the biggest point bomb ever for the Monday Crew.

Quality means an uncompromising paint job on these historically accurate miniatures.
 
Description means a text that reflects your passion and your research for this particular era.

Bravo!

Thursday, 10 March 2022

From DallasE: Churchill Tanks at Dieppe (LV426) (105 points)

So this is about as close as I get to a "points bomb"... four 28mm (1/50) vehicles combined with one planetary visit. Anyway it's four Churchill MkIII medium tanks, as seen (kind of) on the infamous Dieppe raid of 19 August 1942.

The four vehicles I've done are all Churchills of The Calgary Regiment (Calgary Tanks), aka 14 Canadian Armoured Tank Regiment (14 CATR). I had three of these painted already in a standard British armour green, but for Christmas was given another stock Corgi model by Challenger DaveV, which prompted me to revisit the three I'd already painted...
 
So I got the project underway in earnest, first re-priming all four models with flat black spray, researching the correct colour for the Canadian armour at Dieppe (turns out it was described as "dog sh!t brown" and I used GW Steel Legion Drab to replicate that), and sourcing decals for the tanks. I got these from Peddinghaus, a cottage supplier in Germany that makes a ton of very cool and obscure decals in 1/72 and 1/48 scale.
 
I also figured I may as well do some conversions on the tanks to better replicate their Dieppe configuration (because why not, right?) This involved scratch-building the exhaust pipe extensions that allowed the Churchills to deep-wade without allowing water into the engines. This was characteristic of the Dieppe Churchills and is seen on every photographed example. 

I made the extensions out of thick flexible wire (I think it's maybe soldering wire) bent to shape and superglued to the exhaust pipes of the tank. I then ran thread between the upper ends of the extensions as shown in photographs of the vehicles on the beach. The extensions were then heavily weathered with rust effect wash.
  
Unfortunately none of the Churchills at Dieppe were equipped with track guards for the upper runs, as seen on these Corgi models... sadly I don't think anyone makes appropriate models in 1/48 or 1/50 and taking a grinder to these models to remove the guards wasn't really in the project remit.

I decided to portray the three vehicles of 9 Troop, B Squadron - Bluebell, Blossom, and Buttercup, as well as the troop leader of 6 Troop, Bob (all four were Churchill MkIIIs). The decals from the Peddinghaus set are excellent and have great detail. However they did take a good deal of work to fit, as they are not "pre-cut" and need to be trimmed to size. There's also 15 decals for each vehicle!

I didn't do a ton of weathering on the vehicles as this would be the first time they were in action - just some light water streaking down the vertical panels, and dust along the lower part of the vehicles and suspension.
 
Here's a close-up of the exhaust extensions. Honestly they were a bit of a futz to build but I like the way they turned out - they really give the tanks the "Dieppe look":


I'm actually quite happy with the way these turned out. This year marks the 80th anniversary of the Dieppe raid and I am looking forward to setting up a game this summer to mark it. We've played Dieppe games a few times before (but not for years) but I think the new Churchills are really going to add to the vibe.

I'm visiting LV426 with this project as one of the planetary themes is "a really really bad idea." Now if you've read anything about the Dieppe raid, you know that it was pretty much universally considered to be a disaster, notwithstanding some really heroic conduct by some of the combatants, some isolated success by the Commandoes on the flanks, and the ex-post-facto justification (largely by Mountbatten) that Dieppe was vital practice contributing to the success of the Operation Overlord (D-Day). Having said all this - Operation Jubilee was a really really bad idea. Dieppe was essentially a fortress, the beach was almost purpose-designed to break tank tracks, and the plan didn't take into account the extensive German fortifications on the headlands overlooking the beach. A really really bad idea.  

Points:

4x 28mm vehicles:     80 points
LV426 bonus:             20 points
Total:                        100 points 
 

Cheers,

Dallas

I know less about Dieppe than I should. I look forwards to finding out more at the 80th anniversary! I've always found the Churchill to be an unattractive vehicle, but you've done great work on these vehicles. The colour alone is hard to describe! The light weathering is really nice, and your attention to detail with the conversions and decals is worth a few extra points.

Barks

Monday, 31 January 2022

From FrederickC: Skirting 'The Great Abyssal' aboard Lady Sarah's Star Yacht [Cybertron][Klendathu][Coruscant] (150 points)

 

We have left Arrakis behind us with a terrible case of sunburn, and I'm still shaking sand out of my boots and trouser pockets. The plan is to do a short hop over to Cybertron, and then take Lady Sarah's Star Yacht past the Great Abyssal to Coruscant with a quick stop on Klendathu along the way. So three stops in total and two yacht tickets. I plan to spend some time in the lounge while aboard the yacht to see if they can mix up a Blue Meanie like the ones they serve at the Blauwe Blome bar on Tycho Station.

Interstellar Yacht by Shusei Nagaoka

 

Cybertron (#9 on the map) - home planet of the Transformers, a shining metal, technological world, and the theme is 'Transformational/Transformative'.

Gandalf: Through fire... and water... From the lowest dungeon to the highest peak, I fought him, the Balrog of Morgoth. Until at last, I threw down my enemy and smote his ruin upon the mountainside. Darkness took me. And I strayed out of thought and time. Stars wheeled overhead and everyday was as long as a life-age of the earth. But it was not the end. I felt life in me again. I have been sent back, until my task is done.

Aragorn: Gandalf.

Gandalf: Gandalf? Yes... that's what they used to call me. Gandalf the Grey. That was my name. 

Gimli: Gandalf! 

Gandalf: I am Gandalf the White! I come back to you now, at the turn of the tide.

The figures of Gandalf the White on foot and mounted on Shadowfax are the older Games Workshop Lord of the Rings castings. I have included Gandalf the Grey in the photos for the 'Before' and 'After' comparison.

 




Klendathu (#10 on the map) -  home world of the Pseudo-Arachnids. The planet has many warriors and workers all over its surface. However, its brains and queens live deep underground and are capable of surviving an invasion by the Federal Military. The theme is 'An Invasion Gone Bad'.

 


On the morning of 19 August 1942, landing craft of the 2nd Canadian Division hit the beaches around the port of Dieppe. Red Beach, on the eastern half in front of Dieppe itself was assaulted by the Essex Scottish. The battalion was supposed to have armoured support from the 14th Army Tank Regiment (The Calgary Regiment (Tank)), but the tanks arrived 15 minutes too late. LCT No, 2 landed three tanks of 13 Troop of 'C' Squadron - 'Cougar', 'Cheetah', and 'Cat'. 'Cougar' quickly became immobilized, and only 'Cheetah' and 'Cat' made it onto the Promenade. 'Cat' was able to take out a 47mm anti-tank gun near the harbour entrance,  however its 6-pounder gun, only able to fire solid shot, was mostly ineffective against the German defences. Eventually, 'Cat' made its way back to the beach, having fired off most of its munitions, and the crew abandoned it.

Churchill Mk III T68696 'CAT' is a repainted 1/50 Solido diecast model I acquired from a friend. It was originally painted in a desert yellow/olive green striped camouflage pattern for service in Tunisia, but I wanted it to match another Solido Churchill that I had that depicted 'Cheetah' (shown in the background). So the 'tank from Tunisia' was repainted using Vallejo Dark Earth, and then the vehicle name, numbers, etc. painted on freehand.

 




Coruscant (#11 on the map) - A city-covered planet, Coruscant is the vibrant heart and capital of the galaxy, featuring a diverse mix of citizens and culture. It features towering skyscrapers, streams of speeder-filled air traffic, and inner levels that stretch far below the world’s surface. The theme is 'Imperial'.

And nothing says 'Imperial' like a legionary of early Imperial Rome, equipped with lorica segmentata, gladius, and scutum. This is a 28mm plastic figure that came as a sample years ago with an issue of Wargames Illustrated. I was never sure what to do with it, and thought I might use it as a gladiator in our 'local arena'. I'm glad I had it on hand for this stop on the Challenge Quadrant.

 




Two tickets for Lady Sarah's Star Yacht - the two figures I painted for passage aboard the Star Yacht are (left to right) a Eurasian Solar Union SAW gunner from Ground Zero Games and a Rebel Commando from West End Games. Both date from the mid to late 1990's. I have painted them up in the colour scheme for the Ral Partha Galactic Grenadiers figures I use as 'Planetary Militia'. In the past I have used both GZG and WEG minis to augment the variety of poses and weapons in my squads.

 


 The points being claimed are as follows:

1 x 28mm vehicle @ 20 points = 20 points

1 x 28mm mounted figure @ 10 points = 10 points

4 x 28mm foot figure @ 5 points = 20 points

3 x Challenge Quadrant locations (Cybertron, Klendathu, Coruscant) @ 20 points each = 60 points

2 x Lady Sarah's Star Yacht @ 20 points = 40 points 

Blue routes were via Lady Sarah's Star Yacht

Time to drop into the Inner Ring
 

You're just rocketing around the planets here Frederick.  Nice work on Gandalf the White, really like those sculpts.  And yes, as we discussed in advance (see Ray he ran it past me in advance) I'll buy this as a transformation.  No arguments on Dieppe as an Invasion gone wrong and well done on those doomed Churchills.   I think I have that Legionary somewhere too, great job on the shield.  And finally nice to see some vintage SciFi figures given some love.