Monday 19 January 2015

From AaronH - 28mm ECW, Raisuli and Boromir (195 Points)

This week's entry is a little bit of everything.  The first entry is an ECW Pike and Shotte regiment.  These are 36 28mm plastic models from Warlord Games.

The blue coat regiment
I want my ECW regiments to have a block of 12 pike plus command, flanked by eight shotte on each side.  This left me with a problem, based on the Warlord kit.  There are not enough vertical pikes and I don't like the horizontal ones since they are always getting in the way.  There are also too many shotte.

One sleeve of shotte.
I painted up all of the shotte but left off the horizontal and all but two of the angled pikes.  This means I'm four pikes short of a full regiment.

Command and pikes.
This is the first regiment I've ever done on multi bases.  Prior to this all of my models have been one per base.

The other sleeve of shotte.
The Warlord models are very nice, other than the unfortunate sprue contents.  The faces have a one of character.  The details look good and they go together well, with lots of options.

Rear Shot.
I didn't enjoy painting these.  It's a couple of things, neither of which is the fault of the models, really.  First off, I went for the whole bunch in one go.  That's 36 models in a week. For me that is a record.  The result was that I felt rushed to get them done.

Another rear shotte.  (see what I did there?)
As I was painting I'd think, "only one more bit to do and I'm done".  Then I'd finish that bit and see two more unpainted parts.  "Where did that come from?  I don't even know what that is.  How am I supposed to paint it?"  I'd head off to the references and, as often as not, find nothing.  I muddled through it all, but it was frustrating.

The flag that came with the set.
I was feeling that way right until I washed them.  All of a sudden they came alive and I was enchanted.  The character and detail that were painful to paint looked great.  I wish I had a use for them.  I bought them when I was going to play some ECW with one of the guys at the club.  He then dropped off the face of the earth and these sat on the shelf for a year.

A stand of shotte.
While I was painting I calculated what I would need to get a minimum playable army. Another box of these plastics, some standing pike (metal) and a few command models, plus one box of cav and one cannon.  It's a little insane really.  All of that for an army I have no intention of playing any time soon.  More of a "just in case" army.

The green shotte.
I even have 25% of a second regiment ready to go.  Happily a moment of sanity prevailed and I'll not be adding to this army until I have a likely opponent, or the ECW bug bites a lot harder than it has so far.

Side shot.
For now these lads will find a home on a shelf.  It's sad but those are the breaks when you're a model.

The other flag from the box.
The next entry was supposed to be for the Victorian themed round.  My son's birthday party was that Saturday and after three hours of wrangling kids around the pool I sat down to base this model.  Two hours later I woke up and it was way too late to get him based and have the sand/glue dry.

The Raisuli
This is a 28mm metal model from Gringo 40.  It's the Raisuli from "The Wind and the Lion".   I love this movie, mostly because the Marines land and fight just about everyone from the locals to the Germans and French.  There's some other stuff but, whatever.

The horse was last seen next to a Celtic nag.
This is a very fine model.  Loads of detail, sharp with little casting.  The sculptor captured Sean Connery's face very well.

Sean Connery.
Better late then never.  This model will lead a company for In Her Majesty's Name.  Now I just need to source the right Berber models to fill it out.

Boromir.
This last model was not part of the plan for the Challenge.  Rhys has been using Gondor models to play Lion Rampant and wanted a new hero for his army.  Boromir and Aragorn vie for first place in his affections.

The Captain of Gondor.
When Rhys asked me to paint this model up for him; well, I just couldn't say no to that, could I?  This is a really nice model.  Great detail, very sharp casting.  He looks just like Sean Bean.  (Hmm, perhaps I should call this the Sean round).

The rear of the model.
Rhys is happy with him, so I'll count this one a win.  That's 37 28mm foot models and one 28mm mounted model.  Not bad for one week's work.  I think I'll slow it down for next week though.


From Curt:

Holy smokes! What is it with you Monday people?! Everyone who's posted today has been painting like maniacs - it's awesome!

Your ECW unit turned out brilliantly Aaron. I enjoyed reading your thought progression as you moved through the week as it reflects many a night at the hobby desk where I've wondered, 'Why am I doing this again?' Nonetheless, as you say, there is a great feeling of satisfaction when you get a unit done. It's just too bad there is nobody in your area that plays the period as I know how difficult it can be when you're holding the torch alone. 

Boromir is great model to be sure but I have to say I really liked seeing this Raisuli figure as I've always wanted to get one myself. He does look to be marvellous casting and you've done an excellent job on him. It makes me want to see the movie again...

Welcome to the top 10 Aaron - well done!

31 comments:

  1. Great work Aaron. Excellent stuff. And I have about 15 "just in case" armies...

    ReplyDelete
    Replies
    1. Thanks Greg. It's too bad we don't live closer so they could get some play time.

      Delete
  2. Lovely work Aaron, love the look of the ECW figures especially the officer firing a pistol.

    ReplyDelete
    Replies
    1. Thanks Ray. They are very characterful models for plastics.

      Delete
  3. As I know "nothing" about the ECW I have shied away from the period. Your figures are so good though I am tempted to give the period a second look!
    Bravo sir.

    ReplyDelete
    Replies
    1. There's something about a pike block that is just attractive.

      Delete
  4. Nice work love the look of pike and shot units. Haven't seen the Wind & the Lion in years (may have to go to Netflix) but your figure looks excellent.

    ReplyDelete
    Replies
    1. Thanks Adam. My son has fallen in love with the movie, which is appropriate since I watched it with my father. It's worth a re-visit.

      Delete
  5. Those ECW are great, you did them proud and are my favourites of the submission

    Ian

    ReplyDelete
  6. They all are really good, Aaron! I too like the Rasuli the best...he really does look like Connery! I'm going to have to find a copy for my collection!

    ReplyDelete
    Replies
    1. He's well worth the effort to pick up. It's a great model, even better in the "flesh".

      Delete
  7. Aaron, these look great. I particularly like the ECW unit and agree with your feelings during the painting process. I've felt the same with 6mm, it's only towards the end that I get a good feeling about the figures/units.

    ReplyDelete
    Replies
    1. Thanks Peter. I felt that a lot more with this unit than most. It's that aha moment that keeps me painting though.

      Delete
  8. Great painting work. I like a lot Sean Connery!!!

    ReplyDelete
  9. Really nice painting all round and I chuckled at your "army with no chance of a game" situation, given how familiar it is! Perhaps they can come and have a game against my Roman army, also from warlord games and in the same position.....

    ReplyDelete
    Replies
    1. It's always a shame to have an army with no chance of action. I usually try to collect both sides, ostensibly so that I can sucker someone else into a game, but also for those solo games that are sometimes all you can get.

      Delete
  10. Fantastic work, all the minis are beautifully painted - Sean is the eye-catcher, of course, but they are all brilliant! Cheers!

    ReplyDelete
    Replies
    1. Thank you. Two Sean's so I'll take that as one caught by each eye.

      Delete
  11. Cracking ECW mate, they look really good despite your own personal reservations. I steer clear of Warlord for the reasons you have experienced with box contents.

    The following made me laugh out loud. I've painted over 300 x 28mm ECW and this still happens to me...

    [quote]As I was painting I'd think, "only one more bit to do and I'm done". Then I'd finish that bit and see two more unpainted parts. "Where did that come from? I don't even know what that is. How am I supposed to paint it?"[unquote]

    ReplyDelete
    Replies
    1. It's more funny in retrospect. Of course anything that is funny sucked for someone, it's the perverse nature of humor.

      Delete
  12. These look great! If it helps, I go through the exact same mental anguishes, where I don't really like what I'm painting until I'm almost done with the figures. There's always this magic moment where the figures come alive, but until that it's very much a case of wincing and whinging every time I realize there's something else on the figure to paint...

    ReplyDelete
    Replies
    1. You've captured it exactly David. Thanks.

      Delete
  13. Great looking figures.They all came together nicely.

    ReplyDelete
    Replies
    1. Thanks Sean. (Another Sean. It really is the Sean post).

      Delete
  14. You may not have enjoyed painting these models but the result was well worth the effort I think.

    ReplyDelete
    Replies
    1. Thank you. That means a lot coming from you.

      Delete