Thursday 26 January 2017

From Curt: Kablooey!! Exploding 'Star Wars' Rebel Starships (30 Points)


Ever since seeing 'Rogue One' over the holiday break I've been having a wonderful renaissance delving into all things 'Star Wars'. I feel like I'm eleven all over again (if only my hair follicles would follow suit)!

This resurgent interest made me dig-up my copy of 'Star Wars: Armada' by Fantasy Flight Games. For those who are not familiar with the game, 'Armada' is a fleet-level miniatures game, where players get to control the huge starships and fighter squadrons that are so iconic in the films. Rebel Blockade Runners, Star Destroyers, Mon Calamari 'Pickle Ships', swarms of TIE fighters, you got it, they're all a part of the game. It's super fun.

Our group is just about to start a campaign using the new 'Corellian Conflict' expansion that came out a few weeks ago. The guys are busy creating their fleets and so I thought I'd add some colour to the tabletop with some bits and bobs. What we have here is a pair of critically damaged ships for set dressing. With these models, victorious admirals will have the satisfaction of seeing their crippled adversaries drift across the table instead of the original models simply being removed from play.

The Rebel frigate is hit amidships and begins to break apart.
These two ships are from the Rebel Alliance. One is the famous Rebel Blockade Runner, or CR90 Corvette, that was seen carrying Princess Leia in 'A New Hope', and the other is a Nebulon-B Escort Frigate which was first glimpsed in 'The Empire Strikes Back'.


Both of these models were downloaded from Thingiverse (thanks Danesgift!), tweaked/re-scaled, printed off on my 3D printer and mercilessly bashed-up for effect. The stands are prints as well.





Below are a couple raw prints, with all the supports still needing to be removed and sanded down. Yes, they are SUPER orange when they first come off the printer.


The explosions are 3D fractal models, designed by Aeron203. 


I re-scaled and sliced the fractal models to make varying sizes and textures of explosions. I added some blown-out debris from thin plasticard, and for the Nebulon-B I gave it a turbo laser hit (with a bit of painted steel rod) for a bit of drama.


The raw 3D models above provides you a hint of the upcoming Imperial ships which will be getting the same treatment - but that will be for another post.

Points? Hmm, I would say they are the equivalent of 15-20mm vehicles?  So, 12-24 for the pair? I leave it to you Dave!





So, the Snow Lord managed to catch my shift with scant minutes to spare. And the Comm is currently crewed by a HUGE Star Wars Fan-atic!
Yup, I"m pretty much gobsmacked!

Those ships are even more wicked than the wrecks and scenery bits that I've seen when Battlefleet Gothic was all the rage. not to mention that your brushwork is waaay better than the factory paints that come with the game. The explosions could've just been left as is, but I noticed you even have chunks of hull flying off in the explosion. That is just as cool as I'm sure the game will be with these derelicts drifting.
 Just for that, we have no remorse for adding a few discretionary points for the sheer spectacle....Sith Lords are all about the spectacle after all. ;)

24 comments:

  1. My nerd detector just went all the way to 11! Cracking stuff Curt :-)

    ReplyDelete
  2. absolutely amazing, 3-D printing, huge explosions and Curt's trademark excellence. What a away to wake up.

    ReplyDelete
  3. Super cool and just jaw droppingly excellent

    Ian

    ReplyDelete
  4. Fabulously nerdy work Curt! :)

    ReplyDelete
  5. Nerdelicious! Now, who's showing off here then?

    ReplyDelete
  6. Downloading? 3D printing? The luddite in me is running scared but the results are fantastic!
    Best Iain

    ReplyDelete
  7. The Nerd is strong in this one ;)

    That is absolutely genius, I am in awe!

    ReplyDelete
  8. Hail the uber nerd, we are not worthy! Excellent stuff all round. I looking forward to making Stacey and Sylvain place these on table when we crush the rebel swines!

    ReplyDelete
  9. Great stuff dude! Exploding stuff is always a treat on the table...

    ReplyDelete
  10. Oooh wow these are immense 'set dressing' for armada. I rather like the game, it can get wallet-crushingly expensive and has some oddities in mechanics, but nothing beats pushing an Imperial Star Destroyer around and flinging the handful of dice that represent its turbo laser batteries.

    Your 3D printer adventures are getting better and better

    ReplyDelete
  11. Fantastic work. I don't know about the physics of big smoky explosions in space, but I don't think physics matters much in the SW universe.
    While the SW setting leaves me cold, if someone creative with a 3D printer would do models like this for the Honor Harrington universe, I would be the first one with my credit card out to fund the Kickstarter.

    ReplyDelete
    Replies
    1. I'm not sure if you've seen it, but there's a game called Saganomi Island Tactical Simulator (SITS). It's about space combat in the Honor Harrington universe. It was really detailed. There were also miniatures for the game. I tried it once at a Convention.

      Delete
    2. Thanks, Rod, I will have a look for it.

      Delete
  12. Wonderful stuff... very creative Mr C

    ReplyDelete
  13. I'm drooling like a Pavlovian dog right now. Awesome stuff Curt!

    ReplyDelete
  14. Amazing figures and really creative with the expanding insulation to get the little organic looking bits in the explosions. Top quality printing and painting

    ReplyDelete
  15. Wow those are some sweet looking wrecks

    ReplyDelete
  16. Thanks very much for the kind words everyone! It's very encouraging and will give me impetus to get the next set done.

    ReplyDelete
  17. Wooha! Now, that's totally gorgeous Mr C! I really don't know where you take all that inspiration from but I'm rather sure it has something to do with the dark side.

    ReplyDelete
    Replies
    1. As for the source of Curts' inspirations ... I think equal parts espresso, night owl tendencies and a misanthropic attitude add up to membership to the DarkSide🙃

      Delete
  18. Holy smokers! This is just fantastic. Really shows the possibilities of 3D printing, and as others have said your paint jobs really bring the whole thing home. Brilliant work.

    I'm going to send this to my friend who is always talking about getting a 3D printer, just to torture him... ;D

    ReplyDelete
  19. Impressive... most impressive.

    ReplyDelete