Thursday 17 January 2019

For Thursday From PeterD 28mm Buildings (20 points)


For the first post from me this week I have two 28mm buildings, MDF kits from Sarissa.  I have a number of the Sarissa kits and I'm very happy with them.  They go together nicely (other than the odd user error), look the part and paint up nicely.  A pleasant evening building these and another pleasant evening painting them up.
I didn't show it, but the roof lifts off and there is a removable upper floor.

First up is a farmhouse from their English Timber Framed range.  I figure that similar buildings existed in Hesse and Westphalia in the mid 18th century.  I built the kit straight out of the box, as there was enough detail that no add on bits were required, the only change I made was to add black yardstick behind the windows to hide what lies within. 
I do like the  details like the brick work.

I hemmed and hawed on priming, and went unprimed in the end which I think was the right choice.  The details are lightly etched and I didn't want to fill them in with primer (I can have a heavy hand with the spray bomb).  Paint wise I found that a light touch and various degrees of thinning with water did the trick.  It's all one coat, except for a wash over the brickwork, and only four colours - red oxide, unbleached titanium, carbon black and raw umber.   
This is a very tall piece but can be dissembled for storage or transport.  The blades come off, and the building lifts off the pedestal (and swivels on this).  The main structure has two stories plus a roof that lifts off.

Next up is the post windmill, which seem to have appeared all over Western Europe in the black powder years.  IIIRC, having a windmill in your village tended to put you on the map back in the day.  Ligny and Valmy had prominent windmills on the battlefields.  This kit was actually built last spring (it appears in my challenge 8 wind up photo), but it took me until now to get the bottle up to paint it.  I used only three colours for the actual windmill - raw umber and carbon black, with only a touch of unbleached titanium to lighten the woodwork on doors etc.  
The base has stayed in the same place but I rotated the windmill.  I like the stairway and the crane.

Point wise, i used the rough dimensions on Sarissa's site, converted mm to medieval king's body parts and came up with figures that the farmhouse is 49% of a 6" cube and the windmill is 46% of the same cube. if the minion's feeling generous he can round this to 20 points for a full cube, if not then it'll be 19 points.

These will be used for Black Powder wargaming (and yes Ray unlike yours my figures actually appears on table).  We didn't define whether terrain counts for the BP side duel, so I'll ask for my fellow duellists call on that one.  Not that it'll matter as both Ray and Alex have paint bombed me into submission this week.

                                                                       

Lovely pair of buildings, the windmill is particularly impressive and I think you definitely went the right way with washes so that you didn't lose the details. 20 points for this post!
All the best Iain




22 comments:

  1. Replies
    1. Thanks very much Tamsin. I was sure I’d replied earlier, but Blooger says it was an academic moment on my part.

      Delete
  2. Bravo Peter. My horse and musket tabletops will feel quite barren until I have one of those windmill behemoths.

    ReplyDelete
    Replies
    1. Thanks very much padre. You know that you need one....

      Delete
  3. Thanks very much Iain. I quite enjoyed both the construction and the painting of these two structures - I intended to get the fiddly bits of the windmill together first and let the glue harden over night but 30 minutes later I had it assembled. More MDF to come from me in future posts.

    ReplyDelete
  4. Really like these, especially the windmill.

    ReplyDelete
    Replies
    1. Thanks very much Noel. I think the windmill will be appearing on a lot of battlefields.

      Delete
  5. Great work. Even with only a handful of paints, you've really brought out all of the details nicely.

    ReplyDelete
    Replies
    1. Thanks Stuart. Sometimes less is more, I figured that I’d quit while ahead.

      Delete
  6. Congratulations on getting these done Peter. They look great. I so seldom get around to doing terrain, this looks fabulous.

    ReplyDelete
    Replies
    1. Thanks a lot Greg. I liked working in these, nice change from figures.

      Delete
  7. Two luvvly bits of terrain Peter!!!

    ReplyDelete
    Replies
    1. Cheers Ray. I think they’d work well with your Donnybrook project.

      Delete
  8. This comment has been removed by the author.

    ReplyDelete
  9. All great stuff but really like the windmill Peter!

    Christopher

    ReplyDelete
    Replies
    1. Thanks Christopher. It is rather eye catching.

      Delete